ARS Technologies

dentiv’s UHF Tags portfolio is built around a comprehensive set of optimized designs for applications mainly targeting the industrial market, such as parking lot access, asset tracking, and logistics. UHF technology uses the radio wave frequency spectrum, allowing reading distances of several meters (equivalent to several dozen feet), depending on the size of the tags and the operating power transmitted by the UHF reader.

P/N: I00XXXZ70440
Dual dipole 50 x 50 mm (2 x 2 in) antenna design with Monza 4QT for applications such as RTLS, asset, or personal tracking; greater readability in all directions

P/N: I00PADZ90950
Designed for wood environments and applications such as tracking of assets during manufacturing or logistics; Impinj R6 chip family with die cut 100 x 6.3 mm (3.93 x 0.24 in), and adhesive backing

P/N: LZ1XADZ89030
Ideal for wood environments and applications such as asset tracking and logistics; Impinj R6 chip family with round antenna size 31 mm (1.22 in), die cut 38 x 73 mm (1.49 x 2.87 in), and adhesive backing

P/N: I00PADUB0070
Optimal performance for applications on or close to an animal or person’s physical body, with typical applications including marathon runners and emergency personnel; NXP UCODE7 chip family on 12 x 115 mm (0.47 x 4.53 in) inlay

P/N: L??PADUB0450
Reserved for glass (i.e, water, wine, or other spirits) and windshields; long distance authentication with tamper-proof feature including a destructive effect if the tag is removed from original surface; NXP UCODE7 chip family on die cut 45 x 25 mm (1.77 x 0.98 in) label

P/N: I00XXX#20440
Dual-frequency (UHF+HF) with support for multi-frequency RFID and smart card applications for PVC and/or composite ID1 card construction; HF chip is iCODE SLIX2 or MIFARE and UHF chip is NXP G2IM on 76 x 45 mm (3 x 1.77 in) inlay; other HF chips available on demand

P/N: I00XXXU90880
Inlay with tamper loop for applications requiring detection of an event, such as the opening of a box, container, or envelope, or detection of a seal breakage, as well as smart packaging, security and integrity seals, authentication, and healthcare; UHF chip is NXP G2IM with detection loop 156 x 67 mm (6.14 x 2.64 in) and antenna 88 x 25 mm (3.45 x 0.98 in)

P/N: I00XXXUB0302
Designed for applications requiring counting/reading of documents or items stacked on top of each other, including reading identification documents or any situation whereby inlays must be read consecutively when piled up; using NXP UCODE7 chip family on 50 x 30 mm (2 x 1.18 in) inlay

P/N: I00XXXUB0110
Generic optimized design for plastic or cardboard environments with target applications including supply chain management and brand protection; available with NXP UCODE7 or Impinj Monza R6 on 93 x 11 mm (3.6 x 0.4 in) inlay

P/N: I00XXXUB0240
Generic optimized design for plastic or cardboard environments with target applications including supply chain, logistics, and industrial; available with NXP UCODE7 or Impinj Monza R6 on 94 x 24 mm (3.7 x 0.9 in) inlay